Kiosk
How do I resolve a missing network configuration alert?
How to clear the Missing Network Configuration alert: check DHCP or Static IP in Staff Mode, run a Network Test, reconnect to Grid, reseat the cable and power cycle.
๐ Overview
The Missing Network Configuration alert means the kiosk doesn't have a working network setup. Usually the DHCP lease is missing, the Static IP settings are wrong, or the network cable is down. Until it's fixed, the kiosk can't reach Mashgin, so transactions and item updates won't sync. Most cases clear at Step 1 or Step 2.

๐ ๏ธ How to Resolve
Step 1. Check network settings and run a test
- Open Staff Mode and go to Manage > Network, then tap Ethernet.
- Pick DHCP or Static IP to match your site network.
- Tap Save.
- Go back to Network, tap Test, then Run Tests. All good means the alert will clear.
For what each check means, see Understanding the Kiosk Network Test.
Step 2. Reconnect to Grid
In Staff Mode, tap Support, then Grid under Repair Actions. A green check means it reconnected. An orange X means it failed, so go to Step 3.
Step 3. Reseat the Ethernet cable
Unplug the cable from the back of the kiosk for a few seconds, plug it back in, and run the Network Test again.
Step 4. Power cycle the kiosk
Follow How do I power cycle the kiosk?. If the alert stays, go to Step 5.
Step 5. Try a new cable and check the port
Use a known-good CAT6 or CAT5E cable and run the Network Test. If it still fails, the problem is the wall port or your site network.
๐ก Tips
This alert and the Kiosk Offline alert have the same causes. If you already followed How do I resolve a kiosk offline alert?, you've done these steps.
If the same kiosk keeps losing its network setup, the problem is almost always your site network (DHCP server, switch or VLAN). Share the Network Architecture Guide with your IT team, and request a network diagram from trust.mashgin.com.
๐ Related Articles
Need help? Contact support at ๐ง help@mashgin.com or call (855) 475-0889
