Kiosk
Why is the kiosk printer not printing?
Fix a kiosk printer that won't print: check power, run a test print from Staff Mode, reseat the cables and power cycle.
π Overview
If the kiosk isn't printing receipts, the cause is usually one of four things: the printer is off, it isn't responding, a cable is loose, or the kiosk needs a restart. Work through these quick checks in order.
π οΈ Troubleshooting Steps
Step 1. Make sure the printer is on
- Check that the power switch on the back of the printer is set to ON (I).
- If the lights on top of the printer are on, it has power.

Step 2. Run a test print
- Open Staff Mode and go to Manage > Devices.
- Tap Printer and run a test print.
If the test page prints, the printer works. The problem may be the receipt settings, so contact Mashgin Support. If nothing prints, go to Step 3.
Step 3. Reseat the printer cables
- Reseat all cables on the back of the printer.
- Reseat the printer USB cable on the back of the kiosk. Trace it from the printer if you're not sure which one it is. It should be in the last USB port under the power button.


Push each connector all the way in until it's flush. A half-seated USB cable is one of the most common causes of print failures.
Step 4. Power cycle the kiosk
If the test page still doesn't print, follow How do I power cycle the kiosk?. When the kiosk is back up, run the test print again.
π Still Not Printing?
It's likely a problem with the printer or its USB cable. Contact Mashgin Support with:
- Your kiosk ID
- The steps you already tried
- A photo of the printer's lights (on or off)
π Related Articles
Need help? Contact support at π§ help@mashgin.com or call (855) 475-0889
