Kiosk
How do I enable the Staff Screen?
Step-by-step guide for enabling the Staff Screen on your Mashgin kiosk, on both the new Staff Mode layout and the older Manage Mode, including display identification.
๐ Overview
The Staff Screen feature enables the Side UX display as an employee-facing screen. This guide walks you through enabling it and correctly identifying each display.
When should I do this? Any time a second display is added to a kiosk and needs to be configured as a staff screen, or when the Staff Screen was previously disabled and needs to be re-enabled.
๐ง Steps
Step 1. Open Staff Mode
Tap the Mashgin logo on the kiosk screen (or swipe left to right), then enter your passcode or scan your Manager key.
Which layout do you have? Look at the bottom of the screen. If you see Checkout, Transactions, Support and Manage tabs, follow the new layout steps. If not, follow the older layout steps.
Step 2. Tap Enable Staff Screen
New layout (Manage tab at the bottom):
- Tap Manage in the bottom right corner and confirm the Open Manage? prompt. The kiosk stops taking items until you return to Checkout.
- Tap Setup.
- Under INSTALL, tap Staff Screen.
- Tap Enable Staff Screen. A Resetting screens message appears while the kiosk restarts the displays.
Older layout (no Manage tab): Navigate to Manage Mode > Advanced > Enable Staff Screen

If you don't see the Enable Staff Screen button, contact Mashgin Support.
Step 3. Identify Displays
After the screens reset, one display shows DO NOT TOUCH and the other asks Which screen is this? Answer on the display that shows the question:
- If it is the second display (employee side): select Employee Screen
- If it is the Side UX display (customer side): select Customer Screen
Selected the wrong display? Tap Disable Staff Screen (Manage > Setup > Staff Screen on the new layout, or Manage Mode > Advanced on the older layout), then re-enable and identify the displays again.
๐ Relevant Articles
Need help? Contact support at ๐ง help@mashgin.com or call (855) 475-0889
